Bird Control & Pigeon Spikes In
Blackburn & Lancashire

We generally recommend tensioned wire for prominent architectural stonework, commercial fascias, and window ledges where you want a discreet deterrent that is barely visible from the street. The thin stainless steel wire stops pigeons landing by throwing them off balance on their feet. If birds are actively nesting overnight in a sheltered recess rather than just daylight perching, heavy-gauge spikes are necessary instead, as nesting birds will eventually force twigs down between wire strands.

No, we avoid drilling into sound masonry or heritage stonework wherever possible. We bond the UV-stabilised polycarbonate base of the spikes directly to the stone or brick using an industrial neutral-cure adhesive that expands and contracts with changing weather. Where we do work on fragile ornamental stone or painted timber sills, this adhesive method leaves the underlying masonry completely intact while providing a firm, weather-tight hold.

Standard pigeon spikes are too short and spaced too closely to stop gulls, which have longer legs and easily straddle standard wires. For herring gulls, we install dedicated gull spikes fitted with longer, heavier 150mm stainless steel pins set at wider angles. For wide flat roofs and long parapet runs with severe gull pressure, we often pair these with multi-strand tensioned wire or physical netting to completely deny them a landing platform.

Yes, we fit purpose-made clips that snap securely over the outer lip of half-round, deep-flow, or square-line guttering without drilling into the profile. The spikes sit firmly on the outer rim where pigeons love to perch and foul down exterior walls, leaving the drainage channel completely open for running water. This prevents birds fouling window glass and patios below while keeping the gutter free of blockages.

Adhesives will not stick to stonework coated in bird droppings, grease, and atmospheric grime, and spikes fitted onto dirty ledges simply peel off in the first frost. We scrape the stone back to a sound, clean surface and treat it with a specialist biocide to kill off pathogenic bacteria and bird mites. Removing the dried guano completely also eliminates the pheromones and scent markers that draw birds back to the exact same roosting spot.

The entire setup relies on marine-grade stainless steel posts, nylon-coated wire, and small stainless tension springs anchored at regular intervals. These springs absorb high wind buffeting and allow the wire to contract in sub-zero winter temperatures without snapping the line or pulling out the anchor fixings. Once the wire is crimped and tensioned properly to masonry plugs, it stays taut year-round without sagging or vibrating loose.